Previous Image

Back to the Gallery

Next Image

The Work - 2015


02/02/2015 Some of the main accomodation ply cladding in place and undercoat DSC02134
15/02/2015 In order to put ply on the coachroof sides I have now cut holes for the portholes DSC02137
22/02/2015 Headhead now in white gloss with a piece of cover strip, same as the wheelhouse DSC02138
26/02/2015 The engineroom bulkhead clad in ply and undercoated DSC02139
28/02/2015 The bulkhead between the crew accomodation and engineroom clad in play DSC02142
04/03/2015 and undercoated DSC02144
06/03/2015 The main oak beams will look good with some varnish DSC02145
15/03/2015 In the workshop making up cover plates from the oak offcuts DSC02148
17/03/2015 Some detail on the coachroof skylights DSC02154
20/03/2015 Detail of the surround to the forward facing coachroof window DSC02240
24/03/2015 and the overall impression is good DSC02159
31/03/2015 A coat of paint on the inside of the hull brightens the space DSC02224
07/04/2015 Likewise a coat of paint externally on the coachroof, along with porthole surrounds just makes the finishing touch DSC02233
25/04/2015 The smaller portholes for the engineroom and aft accomodation are finished with Oxford Blue surrounds DSC02234
01/05/2015 Time to get back into the helm position DSC02292
16/05/2015 These are the panels for the ceiling above the helm DSC02294
01/06/2015 Instrumentation will be held on panels above head height DSC02301
10/06/2015 More coverplates needed…. DSC02303
13/06/2015 The laptop with Belfield Chart Plotter software lives here… DSC02306
21/06/2013 Some cladding in the helm area DSC02308
23/06/2015 Now moved into the crew accomodation to put up some ply DSC02311
20/08/2015 The carcass for the seating in the deckhouse. It will be covered with ply and varnished DSC02330
30/08/2015 The ply seat base and backs will have foam and seat covers stapled to them. Just like my test piece made with old material DSC02341
01/09/2015 All begins to take shape DSC02342
17/09/2015 Adding a table DSC02352
20/09/2015 Using scrap material to get an idea of space for the galley DSC02353
02/10/2015 A small bath/shower tray and the stud partition walls take shape DSC02361
22/11/2015 Found two beam ends that are rotten so having to replace with new oak DSC02394
27/11/2015 That is one in… DSC02395
15/12/2015 and that is the second DSC02400
15/12/2015 Doesn't actually need insulation but it acts a soundproofing DSC02401
19/12/2015 Lined out and the shower head in place DSC02409
29/12/2015 Given some old worktop so more on the galley mock-up DSC02413



Previous Image

Back to the Gallery

Next Image